Tag Archives: programming

Debugging AVR ATMEGA code with Atmel Studio and ICE

One of the more challenging aspects of writing code for microcontrollers is not being able to liberally sprinkle your code with PRINT statements to show the state of variables and whatnot at particular moments. If you’re working with Arduino-type devices you can always fire up the Serial library and print stuff that way – back down the wire to a… Read more »

AVR basics: reading and writing GPIO pins

Once you’ve set up a pin, or a whole port’s worth of pins, as inputs or outputs, it’s time to start writing and reading values. This series is part of my learning process and I hope it will help others who, like me, are embarking on projects such as programming AVR chips. The way I learn things is to write… Read more »

AVR basics: ports and direction registers

Pretty much the first thing anyone does with a microcontroller, whether it’s a naked AVR chip or something fancy like an Arduino, is flash an LED. This series is part of my learning process and I hope it will help others who, like me, are embarking on projects such as programming AVR chips. The way I learn things is to… Read more »

AVR basics: An introduction to AVR registers and macros

It’s occurred to me that I somewhat jumped the gun when I wrote a blog post a while back about interrupts on AVR ATMEGA microcontrollers. Maybe it would be useful to take a step back. This series is part of my learning process and I hope it will help others who, like me, are embarking on projects such as programming… Read more »

AVR basics: interrupts

      No Comments on AVR basics: interrupts

I confess I’m really enjoying delving into the secrets of AVR microprocessors. Having used Arduinos for some time now – as well as other AVR-based boards such as the mighty and wonderful Teensy – I came to the conclusion that I’m a master at µcontroller hacking. Working with ‘raw’ AVR processors quickly disabused me of that notion. The Arduino ecosphere shields you from a… Read more »

A little bit of an obsession

      No Comments on A little bit of an obsession

So I wrote this Python program to allow me to carry out certain kinds of calculations on binary numbers — you know, AND, OR, XOR and that kind of thing. It’s an absolutely essential tool for anyone who, you know, needs to NAND two 12-bit binary numbers. And happens to own a PiDP PDP-8 replica. Okay, so that’s a very… Read more »

Python on the PiDP

      No Comments on Python on the PiDP

I’m not really a C kind of person. And so when I finished building my PiDP kit, I immediately started thinking, ‘Wouldn’t it be nice to use all these switches and lights from Python?’ Because Python really is my kind of language. You can be properly expressive in it. And there’s not all that nasty business with make files. Fortunately,… Read more »