Category Archives: Epson MX-80

Epson MX-80 Part 4 – ESR check of the dodgy caps

It seems strange that both the capacitors and the transformer – the chief suspects in the investigation as to why my Epson MX-80 F/T III dot matrix printer belched out smoke – tested fine with a multimeter. As far as the capacitors were concerned, I measured resistance directly across their leads (having removed them from the circuit board) looking for… Read more »

Epson MX-80 Part 3 – well, this is strange

And so to the next instalment of trying to get my Epson MX-80 F/T III dot matrix printer back up and working. Previously on Epson MX-80… Just over a year ago, lots of smoke came out accompanied by a crackling noise. I’ve removed the main smoothing capacitors from the PCB and tested them. They seem fine. I tested the transformer…. Read more »

Epson MX-80 Part 2 – out damn cap

Time for the next step in my attempt to bring my beloved old EpsonMX-80F/T III dot matrix printer back to life. But first, some pictures of gorgeous old retro components. As we’ll see, they might be all I have left. I do love old resistors. They have so much character. And look how thick the wires are. There’s also a… Read more »

Epson MX-80 Part 1 – resurrecting an old friend

It’s hard to lose an old friend with whom you’ve shared more than a  third of a century’s worth of experiences. I’ll never forget the day it happened. I heard a coughing, spluttering noise, turned around and, sure enough, smoke was pouring out of the printer. And not just any old printer – my trusty Epson MX-80F/T III, the first… Read more »

Goodbye old friend – the death of a dot matrix printer

It’s one of the curses of getting older. One by one your friends die around you. This time the bell tolled for my beloved old Epson MX-80F/T III dot matrix printer. It’s hard to express how much this delightful old beast means to me. Buying it was a huge step because it was so incredibly expensive (kids who buy printers… Read more »